Posts Tagged ‘West Chester’

« Older Entries

West Chester Heating Maintenance Question: What Are the Different Types of Furnace Maintenance?

Monday, January 30th, 2012

Everyone in West Chester knows that there are different types of maintenance tasks associated with keeping your automobile in tip top shape. Did you also know there are tasks that can be performed at various intervals to keep your home’s furnace in peak running condition?

For example, the most frequent maintenance task is checking the filters in your air handling unit. These are often called furnace filters but in reality, they serve the same function to filter air to and from your air conditioner, too. It might be easiest to just call them air filters. The frequency of replacing or cleaning air filters usually depends on the type of indoor environment you live in – like humidity levels, number of household pets or occupants, etc. In general, filter maintenance should occur every one to three months.

A less frequent maintenance task is cleaning the moving parts of the internal mechanism. You may only need to have your furnace cleaned every six months to a year, depending on its use. In some cases you can perform the cleaning yourself or it is included in an annual cleaning as part of a service agreement with a qualified heating and cooling contractor. A furnace can typically run at peak efficiency when it is cleaned on an annual basis.

You can also make it a regular habit of checking the motor bearings and fan belt, too. You can lubricate the bearings and tighten or replace the fan belt on a same schedule as cleaning the moving parts.

Other maintenance tasks related to your furnace, which may require longer interval times include ventilation system cleaning, or more commonly known as duct cleaning. Some homes don’t require this type of maintenance more than every five to ten years – perhaps longer. Unless there are unusually high levels of dust, allergens, or contaminants in the air, most ventilation systems can remain clean for several years.

Of course, you can turn all of your maintenance tasks over to your West Chester heating and cooling contractor – and have the most peace of mind.

Tags: , , , , ,
Posted in Services | Comments Off

West Chester Contractor Tip: What is a Gas Furnace Draft Hood?

Wednesday, December 14th, 2011

As every West Chester HVAC contractor knows, a draft hood is a necessary part of any gas burning appliance. For a gas furnace in particular it ensures steady air flow to the burners to avoid flares or the pilot light being put out by fluctuation in temperature and air flow.

What the Draft Hood Does

The draft will change in the chimney as exhaust vents towards it – especially when going from cold air to hot. A draft hood is placed above the upper most part of the gas furnace to draw air into the chimney and makes it possible to draw more or less air through the chimney as necessary to create a constant flow.

This makes it possible for the burner to enjoy consistent air flow without any wind gusts or sudden temperature spikes or drops. Hot air, if not put through a draft hood would create a strong air flow through the burners.

A draft hood cools the air as it is released by the burners from 500 degrees F to between 300 degrees F and 350 degrees F. The cooling needs to be carefully calibrated to avoid condensation build up in the chimney however – a problem that occurs when the temperature gets too low.

Maintaining Pressure

The draft hood is a part of a larger system designed to maintain air flow to the chimney. For every cubic foot of gas burned, the furnace needs to have 15 cubic feet of air for combustion and another 15 cubic feet of air for dilution. A draft hood and the rest of the ventilation system make it possible to put a furnace that has many thousands of BTUs in the basement of your home and still supply it with enough air to burn gas and dilute the exhaust before it enters the chimney.

For all of these reasons, if you see your pilot light flickering irregularly, notice a backflow of exhaust or a burning smell in your furnace room, it’s important to call a professional who can inspect and repair the problem before it becomes any worse. Not only can gas burner exhaust contain high levels of carbon monoxide, it can be bad for the device and the chimney if it doesn’t vent properly.

Tags: , , , , ,
Posted in Services | Comments Off

Benefits of Replacing Your Furnace: Some Advice from Milford

Wednesday, November 16th, 2011

You are about to make one of the largest purchases in your life – a new furnace. Maybe your old furnace is on life support and needs immediate replacement or you are looking for a better, more efficient furnace that will raise the comfort level of your Milford home while reducing utility bills and carbon emissions.

If the furnace in your basement, crawl space, or attic is 15-20 years old, it may be a single-stage 80% percent efficient model, which doesn’t meet the higher efficiency standards of today’s models. It uses more energy, i.e. gas, oil, or electricity, to operate. And a single-stage furnace does not always provide even heating to all rooms in the home, based on the varying winter weather conditions. There may be large temperature variations from room to room.

Your new furnace will likely be more efficient and environmentally friendly than the one it is replacing – which are the two biggest benefits to replacing an old furnace. So, let’s take a closer look at these benefits, which link energy efficiency to the latest technology – namely two-stage furnaces and variable speed motors.

Two-stage furnaces start out by running in a first stage, which uses less than 70% of its capacity. This stage works well on moderate winter days. On colder days, the furnace will meet your extra heating demand by adjusting to the second stage in the heating cycle. Since the furnace spends most of its time operating in its lower capacity (first or single stage), it burns less fuel than a traditional furnace that always runs at full capacity and then shuts off when heating demand is met. You will see lower utility bills and a shorter payback period on your new furnace investment.

Variable-speed motors can actually save you money on your energy bill as they consume less electricity than standard motors. Variable speed furnaces save you money by having a higher SEER rating. SEER is the abbreviation for seasonal energy efficiency ratio. The higher the SEER, the more energy efficient the unit. The low operating costs of a variable speed furnace can allow you to run your furnace blower. With the low operating costs of the variable-speed furnace you can constantly run your blower without the worry of driving up your utility bill, allowing for continuously filtered air.

And when you shop for a new furnace, look for add-on equipment such as electronic air filters and programmable thermostats. Each will raise the comfort level you will be enjoying from your new furnace.

Tags: , , , , , ,
Posted in Services | Comments Off

Why is My Furnace Turning On and Off? A Question from Newtown

Wednesday, October 26th, 2011

One of the most annoying things the furnace in your Newtown home can do is to constantly keep turning on and off. This on-off cycling keeps your home from heating up properly. This action – called short cycling – also requires more electricity and drives up utility bills.

Short cycling is caused by an overheated furnace, which triggers safety mechanisms and shuts down the furnace. After a brief interval and cooling down, the furnace starts up again the cycle keeps repeating itself. Not only is it an annoyance, it can also signal more serious problems. A leaking heat exchanger can cause a furnace to overheat – and produce deadly carbon monoxide gas.

If a furnace is working too hard and overheating, it is usually because of airflow in and out. Think of the furnace as a human heart. If there is a blockage in the veins and blood flows slowly, a heart has to work harder to pump blood around or through the blockage. Your home’s ventilation system needs to be clear of dirt, dust, and debris. The more blockage in your ductwork and vents, the more friction is created, slowing down airflow and ultimately ending with an overworked furnace that continues to cycle on and off. And a blocked exhaust vent, such as a chimney or dedicated exhaust vent, can also cause a furnace to work harder. Check for things like leaves, dead animals, or bird’s nests.

The blockage may also be coming from a clogged furnace filter. You should clean or replace your furnace filter after a visual inspection reveals any type of build-up of dust or dirt. Do this at least every three-six months.

If you have a two-speed fan on your furnace, it is recommended that you run the fan in low speed during the cold months and high speed in the warm months. The reason? Warm air is lighter and takes less force to move.

There are other measures to take to prevent short cycling but these usually require a professional heating and cooling service technician to correct the problem. If in doubt, call your local qualified heating and cooling contractor and schedule a furnace inspection. Don’t make your furnace work any harder than it was designed for – and keep your home’s occupants comfortable and safe.

Tags: , , , , ,
Posted in Services | Comments Off

What Is AFUE and Why Should I Care? A Question From Landen

Friday, October 7th, 2011

If you’ve been shopping for a furnace in Landen, chances are you’ve noticed that each furnace has its own annual fuel utilization efficiency (AFUE) rating. These generally range from 80% to the high 90% s and the higher the number, the more fuel efficient that particular furnace is.

But what does this number really mean and just how much should you care? Well, the AFUE rating should actually have a significant impact on your furnace purchasing decision, but that doesn’t mean that you’ll always choose the furnace with the highest efficiency rating either.

For one thing, you’ll have to recognize that not every type of furnace is capable of running at the highest efficiency levels. Oil furnaces, for instance, can’t compete with the super high efficiency gas furnaces on the market today. That’s not to say that an oil furnace might not be the best choice for you under certain circumstances, but it does mean that you should take a close look at your furnace usage before you make a decision.

If you do choose a gas furnace, you will of course have the option of getting one that can reach up to 97% or so efficiency. However, that may not always be the best choice either. If you live in a place where with very harsh, long winters and you’re going to be using your furnace heavily, then it’s definitely worth investing in a higher AFUE furnace that can save you considerable amounts on your monthly heating bills.

But if you don’t use your furnace too often as your area has more mild winters it’s probably not worth it for you to invest in such a high efficiency product. That’s because the higher the AFUE of the furnace, the more expensive it is to purchase and install. Certainly you’ll save money every month because you’ll be getting more heat out of the fuel you’re paying for. But if you don’t use your furnace all that much, the savings really won’t be that substantial.

Don’t forget that a furnace with an 80% AFUE rating is still quite energy efficient.

Tags: , , , , ,
Posted in Services | Comments Off

How Much Will a High Efficiency Furnace Save Me? A Question From Newtown

Monday, September 26th, 2011

The furnaces you can buy these days in Newtown are all much more energy efficient than those available even 10 years ago. However, that doesn’t mean that all of the current models are created equal. There is still a pretty big variation when it comes to energy efficiency and when it comes to price, so you need to really know what you’re looking for if you want to get the best deal out there.

The first thing you should understand when you’re trying to pick out a furnace is how energy efficiency for this type of equipment it measured. All furnaces come with an annual fuel utilization efficiency (AFUE) rating that reflects just exactly how energy efficient they are.

Any furnace you buy today will have an AFUE of at least 80%, but it’s possible to purchase models with AFUEs of 97% or more. Of course, energy efficiency is generally a good thing, but there are some other things to consider when you’re trying to decide just how energy efficient you need your new furnace to be.

What this calculation really comes down to is how much you’ll be able to save monthly and annually with a higher efficiency furnace. While your heating bills will certainly be lower the higher the furnace’s efficiency is, you will also pay more up front for the highest efficiency models.

Keep in mind that a furnace with an 80% AFUE is still quite efficient and will almost certainly save you a considerable amount monthly when compared to the unit you’re currently using. And because 80% AFUE furnaces are so much cheaper than those with upper 90% AFUE ratings, they often wind up as the more cost effective alternative overall.

Tags: , , , , , ,
Posted in Services | Comments Off

The Top 10 Mistakes Homeowners Make with Home Maintenance in Blue Ash

Wednesday, September 14th, 2011

Maintaining your Blue Ash home is important, but it must be done properly. Learn these common maintenance mistakes so you can avoid making them yourself.

  1. Forgoing Annual HVAC Maintenance -Your home’s heating, ventilation and cooling (HVAC) system should be thoroughly inspected each year. This is vital to keeping your house comfortable and energy efficient.
  2. Improper smoke and/or carbon monoxide detector maintenance – Smoke and carbon monoxide (CO) detectors should not just be installed properly, but also maintained properly. Test them monthly and replace drained batteries immediately.
  3. Not checking for radon – Radon is a deadly odorless gas that can cause lung cancer. The EPA has extensive materials on the risks of radon and how to mitigate them.
  4. Ignoring manufacturer instructions – Not only instruction manuals are they important for proper installation of important equipment in your home, they also contain maintenance recommendations and schedules. Adhering to these instructions protects your investment in your home.
  5. Not replacing filters regularly – Speaking of regular maintenance, remember that the air filters in your furnace and air conditioning units need to be replaced regularly according to manufacturer recommendations.
  6. Procrastinating on minor leaks – Even the most minor leaks need to be repaired immediately. The water from a tiny leak can damage structural components and create a breeding ground for termites or hazardous mold.
  7. Not keeping gutters clean – Speaking of water damage, clogged gutters can overflow and cause problems in a hurry. Clean gutters and downspouts at the start of spring and regularly as needed.
  8. Insufficient cleaning (filters, ducts, vents, carpets, furnace room) – Keeping filters, vents and ductwork clean extends the life of your ventilation equipment and keeps energy costs down, as does vacuuming regularly and keeping your furnace room free of debris.
  9. Hasty measuring during repairs and renovations – The old saying goes, “measure twice, cut once.” Failing to measure twice when you are making repairs or renovations in your home can lead to a lot of frustration and waste of costly materials.
  10. Skimping on labor costs – Paying cheap rates for poor labor will cost more down the road when you have to hire another contractor to fix the first one’s mistakes.

There are other ways to err in home maintenance, but this list covers some of the more common doozies. In general, as long as you are careful, diligent and not afraid to call in professional help when needed, you will be just fine.

Tags: , , , , ,
Posted in Services | Comments Off

The Advantages of an Air Conditioning System: A Tip From West Chester

Wednesday, August 17th, 2011

Just about everyone knows that air conditioning systems keep your indoor environment cool and comfortable during the hot West Chester summer months. While this may be enough of a benefit for you, there are some other benefits to having a central air conditioning system installed in your house.

For instance, if you have someone in your household who is more susceptible to extreme temperatures than most people, an air conditioning system can actually help improve their overall health. Babies certainly fall into this category, as they have more difficulty than older children or adults do controlling their body temperature.

Also, many elderly people or people suffering from certain medical conditions, particularly heart conditions, are especially sensitive to the heat. If they are unable to stay cool, it can be very dangerous and damaging to their health, and an air conditioning system helps to guarantee that they will be able to stay cool and comfortable even on the hottest days of the year.

Aside from direct health concerns, air conditioning systems can also help to alleviate the symptoms of colds and allergies. They do this by controlling the level of humidity inside your home. If the air in your house is too moist or too dry, it can exacerbate cold and allergy symptoms, as well as dry out skin and make the indoor environment generally uncomfortable.

Proper humidity control is also important because it helps to ensure that any air filtration or purification system you have in place is able to operate at peak efficiency. Many of these units have a hard time extracting particulate contaminants from the indoor air that circulates through them if that air is too humid or too dry. With a state of the art air conditioning system in place, however, you will not have to worry about whether or not the humidity level in your home is out of balance.

It is also worth noting that a central air conditioning system can be preferable to a window mounted unit because it provides for a more even distribution of cool air throughout the house. Also, when you have a central air conditioning system, the condenser which is the source of most of the noise and vibrations that air conditioners make will be located outside and out of earshot. With window mounted units, on the other hand, there is really no way to block out or diminish the noise.

Tags: , , , ,
Posted in Services | Comments Off

Maintenance Tip From Oakley: Cleaning Your Conditioner Coil Will Save You Headaches Later

Monday, August 8th, 2011

You have plenty of things to clean all over your Oakley house. But do you really have to clean your air conditioner too? Well, if you want it to keep working well, you do. In fact, cleaning the coil of your air conditioner is a quick and easy process, especially if you do it on a regular basis, and it can save you a great deal of frustration later on.

Like any machine, your air conditioner needs a tune up from time to time in order to continue to function properly. While a lot of this is taken care of if you have an annual maintenance service performed by a professional, your air conditioning coil will benefit greatly by being cleaned more often than that.

In fact, during your annual maintenance visit, your air conditioning technician can easily demonstrate for you how to get to the coil and clean it. This is a relatively easy task that you can carry out every month or so when your system is in use to help ensure optimal health and functioning for your system.

Of course, your air conditioning system will still run whether you clean the coils on a regular basis or not. For now, that is. Allowing more and more debris to build up on the coil, however, can have a big impact on the overall energy efficiency of your unit. An air conditioner with a dirty coil will have to work harder to keep your house cool, and that will be reflected by an increase in energy consumption.

Also, an air conditioner with a dirty coil that is having to work harder to keep your house cool will wear out more quickly than one that is working properly without added impediments. The added wear and tear that this causes to various other parts within your air conditioner can cause them to malfunction and need to be replaced sooner than they should.

This means more costly repairs, even if they are minor ones. It also means that your entire air conditioning system will probably not last as long as it may have with proper care. You will have to replace it sooner, adding even more to the cost of having and running the equipment.

Cleaning your air conditioner coil regularly is a simple and effective way of helping to keep the entire system running smoothly and efficiently for many years to come.

Tags: , , , ,
Posted in Services | Comments Off

Evaporative Coolers

Wednesday, July 27th, 2011

If you’re looking for an effective alternative to a traditional air conditioning system for your home, an evaporative cooler is a great option to investigate. This is not new technology by any means, but evaporative coolers are rapidly gaining popularity these days for several reasons. While these aren’t the perfect solution for every home, they’re definitely worth taking a closer look at if you’re interested in cutting your cooling costs.

Here are some of the benefits of evaporative coolers:

  • Energy Efficiency – Because they cool air through evaporation, evaporative coolers use much less energy than traditional air conditioners to achieve the same results. This will take a big chunk off your energy bills each month.
  • Competitive Pricing – You can buy just about any size evaporative cooler for less than a comparably sized air conditioner. And just like air conditioners, evaporative coolers are available in a wide variety of sizes so you should have no trouble finding one to fit the space you need cooled.
  • Easy Installation – Whether you opt for a smaller window unit or a larger centralized one, evaporative coolers are at least as easy to install as air conditioners if not more so. The smaller units are made to fit into windows just like a comparably sized air conditioner, and central evaporative coolers operate through the same air ducts as your central heating system. They’re easy to integrate into your home and often less labor intensive than a central air conditioner to install.
  • Complete Air Circulation – With an air conditioner, you need to have your windows and doors sealed up tight to keep the cooled air from escaping. But because evaporative coolers work by cooling outdoor air as they bring it into your home, they require other doors and windows in the house to be open to function efficiently. As the evaporative cooler blows cooled air into the house, it pushes hotter air out, leaving you with a comfortable environment and a constant supply of fresh air.

Of course, evaporative coolers aren’t the right choice for every situation. They work extremely well in areas with hot, dry climates, but they have a harder time cooling your home when the air outside is hot and humid. They also require water to keep their cooling pads moist, and if you live in an area where drought conditions are common, it may be difficult to keep up with their water consumption.

Tags: , , , ,
Posted in Services | Comments Off

« Older Entries