Posts Tagged ‘Kenwood’

Pros and Cons of Various Heating Systems in Withamsville

Friday, December 9th, 2011

When it comes time to install a new heating system in your Withamsville home, there are a lot of options to consider. Many people get overwhelmed when confronted with all of the furnaces, boilers and heat pumps on the market these days. So, to help you get a handle on what each has to offer and which will offer you the best benefits, here is an overview of the modern heating system market.

Furnaces

Furnaces are the core of a forced air heating system and use gas, oil or electricity to heat air which is then circulated through your home by a blower in your air handler. Furnaces are among the most fuel efficient heating systems on the market today with options available at up to 95% AFUE (meaning it uses up to 95% of the fuel consumed to produce heat). They are also inexpensive to install and while they don’t last quite as long as boilers, they are highly efficient when well cared for.

Boilers

Boilers use gas, oil or electricity to heat water or steam which is then circulated through your home into radiators or baseboard heaters. The heated water or steam releases heat into your home and heats it in turn. While not quite as energy efficient as a high efficiency furnace, boiler heat is perfect for homes with existing radiators and no room for vents and ductwork. It also has less of an impact on indoor air quality since there is no air movement and boilers tend to last a very long time when well maintained.

Heat Pumps

Heat pumps are becoming increasingly popular, especially in milder climates where it rarely gets below 40 degrees F. A heat pump uses the same technology as an air conditioner to extract heat from outside using a compressor, evaporator coils, and condenser coils with refrigerant.

It is most efficient in the spring and fall when temperatures are mild, but it uses much less energy than either a boiler or furnace and it can be used in the summer to cool your home. When properly maintained, a heat pump will last a while save quite a bit of money, though it is recommended that you have an emergency heat source for days when the temperature outside gets below 40 degrees F.

Tags: , , , , , , ,
Posted in Services | Comments Off

How Heating Zone Control Can Save You Money: A Tip from Kenwood

Friday, November 18th, 2011

The costs of heating your Kenwood home have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating equipment. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

Tags: , , , , ,
Posted in Services | Comments Off

It’s Time for a New Furnace: Some Advice from Cincinnati

Monday, October 17th, 2011

Replacing your furnace in your Cincinnati home is probably not something you want to think about. After all, a new furnace is a big investment and not something you probably have too much experience with. And sometimes having your current system fixed or tuned up is all you need to get your home heating situation back on track. But there are certain situations in which it makes more sense to just go ahead and get a new furnace rather than simply patching up the old one.

For instance, if you have to call for either minor or major repairs to your furnace on a regular basis, it’s probably time to consider investing in a replacement. All of those repairs cost money and chances are that the furnace you’re paying repeatedly to replace isn’t going to last that much longer anyway.

Rather than continuing to dump money into a furnace that just isn’t cutting it anymore, you’ll be better off making the investment in a new unit. The truth is, you’re going to have to do it sooner or later and by buying a new furnace now, you’re actually saving all of the money you would have spent on repairing the old one for another year or so.

Also, a furnace that requires such frequent repairs is probably not functioning all that efficiently either. When you replace it with a newer model, you won’t just save money on repairs. You’ll also likely notice a considerable savings on your monthly energy bills because of how much more efficient your new model is.

Even if you haven’t been repairing your furnace often, you may be able to notice some signs that the old unit isn’t quite up to the task anymore. If you’re suddenly having some significant humidity problems in your house or if your home isn’t being heated evenly, there’s a good chance your furnace is on its way out.

And, in fact, even if your furnace is functioning just fine but is more than 10 years old or so, it’s very likely you’d benefit by replacing it. That’s because the newer furnaces available now are so much more energy efficient than their predecessors that the savings you’ll incur monthly will quickly make up for the initial installation investment.

Of course, you don’t want to get rid of a good furnace if you don’t have to. But if your furnace is getting close to the end of its expected lifespan, you may very well benefit by putting out the money for a new one now so you can start saving right away on your monthly energy bills.

Tags: , , , , , , ,
Posted in Services | Comments Off

How Much Will a High Efficiency Furnace Save Me? A Question From Newtown

Monday, September 26th, 2011

The furnaces you can buy these days in Newtown are all much more energy efficient than those available even 10 years ago. However, that doesn’t mean that all of the current models are created equal. There is still a pretty big variation when it comes to energy efficiency and when it comes to price, so you need to really know what you’re looking for if you want to get the best deal out there.

The first thing you should understand when you’re trying to pick out a furnace is how energy efficiency for this type of equipment it measured. All furnaces come with an annual fuel utilization efficiency (AFUE) rating that reflects just exactly how energy efficient they are.

Any furnace you buy today will have an AFUE of at least 80%, but it’s possible to purchase models with AFUEs of 97% or more. Of course, energy efficiency is generally a good thing, but there are some other things to consider when you’re trying to decide just how energy efficient you need your new furnace to be.

What this calculation really comes down to is how much you’ll be able to save monthly and annually with a higher efficiency furnace. While your heating bills will certainly be lower the higher the furnace’s efficiency is, you will also pay more up front for the highest efficiency models.

Keep in mind that a furnace with an 80% AFUE is still quite efficient and will almost certainly save you a considerable amount monthly when compared to the unit you’re currently using. And because 80% AFUE furnaces are so much cheaper than those with upper 90% AFUE ratings, they often wind up as the more cost effective alternative overall.

Tags: , , , , , ,
Posted in Services | Comments Off

Allergens Affected by Indoor Air Quality Systems: A Guide From Kenwood

Wednesday, September 21st, 2011

Indoor air quality devices are designed to capture and remove certain allergens from the air in your Kenwood home, but what exactly is being removed and how would those allergens affect your health if left to circulate? Here is a quick rundown of common allergens found inside the average home and why you should have them removed:

  • Dust Mites – Dust mites develop in high humidity conditions – above 50%. This means that dehumidification to a healthy range between 35-50% will keep them from developing and ensure your indoor air stays comfortable and safe. Dust mites are not dangerous but they can severely increase complications from asthma and other uncomfortable conditions.
  • Animal Dander – Dander from cats, dogs, birds and other furry or feathered creatures is a common allergen for millions of people. If you suspect dander as an allergy, go on vacation to a place without dander and see how it affects you or your loved ones.
  • Dust and Dirt – Dust is in every home and while it is a common irritant, it can inflame asthma or worsen allergies many times over.
  • Pollen – Pollen is a problem for anyone with seasonal allergies or hay fever. While medicine can help, proper sealing of your house and indoor air filtration can reduce the presence of pollen from clothing and animals.
  • Mold Spores – Mold develops in high humidity and in ductwork where it is dark and sometimes damp. Proper filtration with a HEPA system and dehumidification will reduce this risk.
  • Bacteria and Viruses – Bacteria can develop in the air from common colds, old food or outside contaminants. Use a UV light to remove these from your air handler or ductwork.
  • Smoke and Exhaust – Indoor/outdoor ventilation can allow in smoke and exhaust that irritates most lungs. To avoid this problem install an electronic air cleaner that can target particles in smoke.

Getting rid of allergens in the air is an important aspect of maintaining a clean and healthy household. Proper air cleaning, filtration and UV purification will reduce these allergens many times over. There are also some great tips on the Asthma and Allergy Foundation website for how to reduce the presence of those allergens to start with.

Tags: , , , ,
Posted in Services | Comments Off

How Does Central AC Work? A Question From Kenwood

Friday, August 19th, 2011

We pretty much just take the fact of central air conditioning for granted these days in Kenwood. It is present almost everywhere and it is hard to imagine getting through a long hot summer without it. But if you are like most people, you probably do not actually know how central air conditioning works. While you can certainly take advantage of it without understanding it, the basic concept is pretty simple.

Basically, central air conditioning systems are composed of an outdoor unit that typically houses the compressor and condenser and an indoor unit that manages the flow of air throughout your house or other building. This indoor unit is typically either an air handler or a furnace, and it directs the flow of air through a series of ducts that feed into the various rooms of the house.

The cool air originates in the outdoor unit and is blown into the house, gradually absorbing heat as it goes, and that air is then returned to the outdoor unit to be re-cooled. What actually happens in the outdoor unit involves the cycle of a type of refrigerant from a gas to a liquid and back. In the condenser area of the outdoor unit, the pressure on the refrigerant is lessened and it is able to absorb heat from the air returning from the house.

This gas, while warmer than the liquid refrigerant, is still quite cold and acts to cool the air being passed back into the house. As that refrigerant moves along to the compressor area, the gas is converted to a liquid and is forced to release the heat it had been holding. In that way, the air conditioner is able to remove heat from the inside of your house and release it outside.

Your air conditioning system is also generally hooked up to a thermostat, which is what controls when the unit switches on and off. You can set the thermostat at the temperature you would like to maintain inside your house and the thermostat will signal the air conditioner to switch on when the indoor temperature rises above that level. And once the indoor temperature is again below the preset level on the thermostat, the air conditioner will switch off again.

Tags: , , , ,
Posted in Services | Comments Off

Maintenance Really Does Save Money

Monday, June 27th, 2011

When it comes to your home heating and cooling systems, you really cannot go wrong with proper annual maintenance. While it may seem like an unnecessary expense, especially if your systems are relatively new, you will save a lot in the long run if you pay that small fee once a year for each system.

During a maintenance visit, a technician can thoroughly clean out your heating or cooling system and check all parts to make sure they are not showing signs of excessive wear and tear. If they do find a problem or a part that needs to be replaced, they will be able to make the necessary repairs quickly and you will not have to worry about calling someone out later for an emergency visit.

Also, catching problems early like this means that repairs will likely involve fewer parts and cost much less than they would if you let the problem go and it became more widespread. The truth is that your heating or cooling system can continue to work when one or another of its parts is not working correctly, but that means that other parts of the system have to work overtime to create the same result.

Your heating or cooling system will also be much more energy efficient if it receives regular tune ups and attention from a professional. Even the best new systems lose a small percentage of their efficiency each year that they are in operation. While this is not much from year to year, the cumulative effect will soon cause your energy bills to climb higher than necessary.

Paying for regular maintenance, then, can actually save you money because it will mean you pay less each month to run your system. And it is never too late to start. Even if your heating or cooling system is not new, it will benefit from a thorough cleaning and tune up. You may be quite surprised how much your energy bills go down after this type of service has been performed.

Annual maintenance can also help you to get more for your money by extending the useful life of the heating or cooling system. Many systems that are properly maintained can last even beyond their expected life span, meaning that you will not have to replace it as soon as you would have otherwise. For all of these reasons, the minimal cost of an annual maintenance visit is well worth paying over the long term.

Tags: , , , ,
Posted in Services | Comments Off