Posts Tagged ‘Cherry Grove’

Cherry Grove HVAC Tip: Surprising Sources of Indoor Air Pollution

Wednesday, March 7th, 2012

Indoor air pollution is a major problem for millions of homeowners throughout the country each year. In fact, the EPA estimates upwards of 20 million households may have problems caused by mold, radon, humidity, exhaust or any number of other pollutant problems. However, not all of the indoor air pollutants out there are so obvious. Some are things you probably have in your Cherry Grove home right now and don’t realize it. Here are some of the more surprising sources of indoor air pollution and what you can do about them:

  • Incense – Incense releases both carbon monoxide and benzene, two chemicals that are potentially harmful to human health. Cancer, skin irritation and asthma risks are all increased in people who spend a lot of time around incense.
  • Laser printers – Laser printers that use toner can release a number of harmful chemicals into the air. That toner is very fine and releases particles into the air that are equal to or in some cases worse than second hand cigarette smoke. If you have a laser printer, consider putting it in a well-ventilated, infrequently used space.
  • Kitchen Stove – If you have a gas stove, it releases Nitrogen Dioxide when on, an unsafe gas that is odorless and fills your home quickly. This gas is bad for respiration and can cause asthma attacks. To solve this problem, simply make sure you stove is ventilated properly when cooking.
  • Spackle – Old spackle – the kind used before the 1980s often contained asbestos which can still be there, waiting to be disturbed. Old asbestos, while not inherently dangerous, will become so if you start doing work in your home or if the spackle starts to wear away. To solve this problem either call an abatement firm or cover the offending wall with a new layer.
  • Drapes – Those drapes are filled with contaminants that cling there, especially if humidity is a problem in your home. Dust mites in particular are bad for your health and can cause asthma and other allergies. Blinds are better than drapes for this reason.

Your home is filled with potentially dangerous problems, but you can avoid them simply by taking care to ventilate, clear away unsafe products and keep things like drapes clean (or remove them). If you’re still concerned about your air quality, call RineAir Heating & Air Conditioning to investigate.

Tags: , , , , ,
Posted in Services | Comments Off

Sharonville Heating Repair Tip: Warning Signs of a Broken Furnace

Wednesday, January 11th, 2012

How do you know when your Sharonville home’s furnace is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your home of heat and comfort, it also can be deadly, too.

Let’s look at some of the warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your Sharonville heating professional for a heating system tune-up.

Tags: , , , , , ,
Posted in Services | Comments Off

No Heat in the House? Things to Check and Do: A Guide from Cherry Grove

Wednesday, November 2nd, 2011

In general, when your heating system stops working, you’ll need to call a Cherry Grove professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.

For instance, if it’s cold in your house and your heat isn’t coming on, check to make sure that the thermostat is set to a high enough temperature that the heating system would be triggered. Particularly if this is the first really cold day of the season, it’s entirely possible that your thermostat was turned down at some point and left there. And if the thermostat isn’t turned up high enough, the heat will never come on.

Also, it’s worth just taking a second to check and make sure that the power switch on the heating system itself is actually in the proper on position. For the most part, there would be no reason for you to turn this off, but it’s always possible it could have happened in any number of ways and it only takes a second to check.

Depending on the type of fuel source your heating system uses, it’s probably a good idea to check to make sure the supply is still available as well. If you use natural gas, check to make sure that the gas line is open, but don’t try to repair it yourself if it seems to be compromised. If you find something like that, be sure to call your gas company right away.

However, if you use oil as a heat source, take a quick peek at the levels in your tank. There’s always the possibility that you used more than you thought you did or that a delivery was missed for some reason and so your heating system simply has no fuel to run on. Similarly, if your heating system runs on electricity, make sure that the fuse wasn’t blown or that it’s not just too loose to provide an adequate power supply.

If you’ve covered all of these basic troubleshooting bases, it may be time to take a closer look at the heating system itself. On just about every type of system there should be some type of reset switch or button. Follow the instructions to press this button and engage the reset process, but be sure to only try this once. If that resetting doesn’t work, it’s time to back off and call in some professional help.

Tags: , , , , ,
Posted in Services | Comments Off

Furnace Maintenance the Whole Family Should Know: A Guide from Mason

Friday, October 28th, 2011

Everyone at RineAir Heating and Air Conditioning wishes you a Happy Halloween weekend! We hope you have a great time dressing up and eating lots of candy! And to help your Halloween be safe as well as scary, here are some safety tips for your furnace that the whole family should know.

Besides warmth in the winter, a finely-tuned HVAC system can clean and filter the air you breathe. That’s important to people who suffer from allergies and is especially important for minimizing the spread of germs that cause colds and the flu. The key phrase in this paragraph is finely-tuned. If your HVAC system is not working correctly – out of tune – it can cost you a great deal in monthly utility bills and can be harmful to your health.

It is important for you and your family members to understand the basics of HVAC system maintenance so you can all understand the symptoms of improper maintenance and its consequences. For example, if anyone in your home is suffering from flu-like symptoms or are constantly drowsy or listless, they may be suffering from the a silent killer: poisonous carbon monoxide gas. This gas is formed during incomplete combustion of fossil oils like natural or propane gas. A malfunctioning furnace can emit carbon monoxide gases and you may never even realize it, until it is too late. Long-term exposure to the gas can cause brain damage and/or chronic sleepiness. It some cases, it can even cause death.

You may be able to diagnose the problem, but you aren’t qualified to test and repair a furnace that is creating deadly carbon monoxide gas. Your best bet is to call a qualified HVAC contractor who can diagnose the furnace and offer repair or replacement suggestions. But there are things you can do to prevent the build-up of carbon monoxide gas.

Check all exhaust vents, like chimneys and flues for any blockages. A blocked or partially blocked vent can cause the build-up of carbon monoxide gas. And never, EVER, use a gas or propane powered heater in an unvented area of your home. These types of heaters create various levels of carbon monoxide gas that needs to be circulated out of each room and replaced with clean, fresh air. So, your family can actively ensure that there is no debris, bird’s nests, animals, leaves, or snow in the ventilation system.

You can also “help” your HVAC system by keeping vents clean by vacuuming dirty vent grilles and, in general, keeping the home clean. The cleaner the home, the easier it is for your furnace to do its job and the easier it will be for you and your family will breathe. These are a few easy maintenance tips will keep you and your family warm – and safe – this fall and winter.

Tags: , , , , ,
Posted in Services | Comments Off

Furnace Fan Doesn’t Run? Why Is That? What Should You Do? A Guide from Cherry Grove

Monday, October 10th, 2011

There are several reasons that a furnace fan might stop working at one point or another. While many of these do require a Cherry Grove professional’s attention, there are probably some things you can check on your own before you go and call in the pros. After all, if you can address the problem on your own, it will at least save you from having to pay a technician to come out.

The first thing to check when your furnace is running but the fan isn’t turning is whether or not the fan is actually switched on. Certain models of furnaces have a separate switch to turn the fan on and off. While there is probably no reason that you would want to turn off the fan by itself, it’s worth taking a look just in case. If that really is the problem, you’ll be up and running and back to dealing with better things in no time.

If that’s not the problem, you might try looking to see if any wires leading to the fan are loose or the fuse is blown. If the fan has no power, of course, it won’t be able to work but the rest of the furnace likely would work just fine as long as it doesn’t run on electricity as well.

Of course, the problem very well may be beyond your power to solve on your own. Don’t despair though. Even though you need to call in a professional, that doesn’t mean that the problem will be expensive to fix. In fact, it may be as simple as replacing your thermostat or the motor for the fan itself.

Just because a fan isn’t working doesn’t mean that you’re going to be paying an arm and a leg to have work done on your furnace. If you can’t easily discover the problem on your own, however, or if you’re not comfortable inspecting this type of equipment at all, you’re generally better off just calling in an expert and letting them do the dirty work for you. Paying for simple furnace fan repairs is definitely preferable to having to pay someone to fix the fan and the stuff you broke yourself while trying to fix the fan on your own.

Tags: , , ,
Posted in Services | Comments Off

Air Conditioners and Energy Use by Percentage: Some Pointers From Amelia

Friday, August 26th, 2011

It’s no secret that air conditioners use up a lot of electricity in your Amelia home and can add substantially to your energy bills during those warm summer months. But did you know that they actually account for an estimated 11% of the total energy used in all buildings in the US each year? This is a staggering figure and makes it easy to see why it’s best to invest in the most energy efficient system possible.

Keeping Your Consumption Down

There are plenty of reasons to try and keep your energy consumption down. You want to save on your energy bills, and the less energy you use, the better it is for the environment. The best and most straightforward way to go about this is to purchase only highly energy efficient appliances and equipment, and that includes air conditioners.

Because air conditioner usage accounts for such a substantial part of the total energy used in this country, putting more energy efficiency models into use is the best way to cut that usage down.

Supplementary Cooling

However, there are other ways to reduce the workload of your air conditioner. For instance, you can use a ceiling fan to maintain good air circulation and keep your home cool. Using a ceiling fan with an air conditioner, even on the hottest days of the year, allows you to turn up your thermostat a bit to conserve energy while still enjoying a comfortable indoor environment. And because ceiling fans use so little energy to operate, you’ll come out ahead on your energy bill.

Passive Cooling

There are also several passive cooling methods you can employ to keep the temperature in your home down. Blocking out sunlight is the most important of these, so keep your blinds closed on any windows that receive direct sunlight, particularly in the early afternoon. Alternately, you can have awnings put up, which allow you to block the direct sun while still keeping the blinds open.

Shade is another effective passive cooling device. Planting trees around your home to block out the sun at the hottest times of day is a totally energy-free way of keeping your home cool and reducing the workload on your air conditioning system. The less your air conditioner has to work, the less energy it consumes and the lower your energy bills will be.

Tags: , , , ,
Posted in Services | Comments Off

The Energy Efficiency Rating of Central Air Conditioners: What Is it and Why Is it Important? A Question From Cherry Grove

Wednesday, August 10th, 2011

When you are shopping for a central air conditioning system in Cherry Grove, you will have to evaluate your options based on a number of different factors. For instance, you will need to decide which type of system is the best match for your home and for your particular cooling needs. It is also important to make sure that the central air conditioner you choose is the right size for the cooling load it will have to take on.

However, it is also very important to evaluate your central air conditioning options based on how energy efficient they are. This will have a great deal to do with how much you pay in terms of cooling costs each month, which makes it easy to see why you should take it into account before you make a purchase.

The energy efficiency of a central air conditioner is generally expressed as a seasonal energy efficiency rating, or SEER. The SEER numbers you will typically find on the latest air conditioning systems range from eight to 19.5 with the higher numbers signifying a more energy efficient model.

So it is pretty easy to figure out that a central air conditioner with a higher SEER will save you some money monthly because it will use less energy to get the same job done. But central air conditioners with high SEERs also typically have high price tags. So to determine how high of a SEER you need, you will need to know more exactly how much more money you will save as you move up in the rankings.

You can do this by comparing the SEER of the system you currently use with the new system you are considering and compare how much your current energy usage would cost you with each model. Basically, you want to pick a central air conditioner that will save you enough to offset the purchase price of the unit.

Often, this means that you will be best off with a SEER 14 or SEER 16 because these units save you a considerable amount over older models without carrying too high a purchase price. However, the amount you save will be directly related to how much you use your central air conditioning system, so if you live someplace that is extremely hot for a large chunk of the year, it may be worth it for you to buy a very high efficiency air conditioning system.

If you have any questions about what type of air conditioner is right for you, please contact your local air conditioning professional.

Tags: , , , ,
Posted in Services | Comments Off

What Are Limit Switches and How Do They Work?

Wednesday, June 15th, 2011

When you set the thermostat on your air conditioning system, you pretty take for granted that the system will maintain that temperature throughout your house. But did you ever stop to think about how it’s actually accomplished? The truth is that there are many moving parts that all play a role in keeping your home cool and comfortable, and one of these is the limit switch.

What Is a Limit Switch?

Although you’re probably not aware of it, you’ve encountered plenty of limit switches over the years. A limit switch is anything that stops an electric appliance under certain circumstances. The little switch that turns the light on in the refrigerator when you open the door and then off again when you close it is the perfect example of a limit switch. Another common one is the switch that stops your washer or dryer from running when you open the door. Limit switches are used for a variety of appliances and gadgets to not only save electricity but to keep you and your device safe.

Limit Switches and Air Conditioning

The limit switch on your air conditioning system is the link between the blower on your air handler and the thermostat. When the thermostat senses that the desired indoor temperature has been reached, it stops the air conditioner from producing any more cold air. At that point, it’s important for the blower to stop functioning as well.

If it doesn’t, the blower will continue to move and warm air rather than cold will begin circulating throughout your home. However, if the blower shuts off too soon, the cold air that’s still being generated by the air conditioner won’t be able to circulate. So it’s essential that the blower be switched off at the same time the cold air stops arriving. That’s exactly what the limit switch does.

While it’s only one very small part of a large machine, the limit switch in your air conditioner plays a vital role in keeping your home comfortable and in allowing your air conditioning system to function as efficiently as possible.

If you notice that your air conditioner is shutting off too soon or not soon enough, it may be because of a broken limit switch. Sometimes, the system simply needs to be reset, something you can do with the help of your owner’s manual. However, if your limit switch is broken, you should contact a professional to take a look and determine if it needs to be replaced.

Tags: , , , ,
Posted in Services | Comments Off